DC 6.5V-55V 30A PWM Motor Speed Controller Brush Motor Wireless Remote

Product Function Introduction: 1-2-3-4-5-6-7-8-9 function settings are as follows: Slow start time setting function 1: 000-100 slow start to 100% speed time is adjustable between 0-10 seconds. The default is 1 second. Slow stop time setting function 2: 000-100 slow stop time is adjustable between 0-10 seconds. The default is 1 second. Speed lower limit setting function 3: 000-080 the minimum speed is adjustable between 0-80% and is less than the maximum speed setting value. The default is 0. Speed upper limit setting function 4: 000-100 the maximum speed is adjustable between 0-100% and is greater than the minimum speed setting value. The default is 100%. Acceleration/deceleration value setting function 5: 001 002 005 010 015 020 025 the speed changes by 1%, 2%, 5%, 10%, 15%, 20% and 25% each time the acceleration/deceleration key is pressed. Motor running time setting function 6: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor stop time setting function 7: 1 second minimum -99 hours 59 minutes 59 seconds maximum. The default is 99 hours 59 minutes 59 seconds. Motor start-stop cycle times function 8: adjustable between 1-999 times. The default is 999 times. With or without timing selection function 9: 0 none, 1 yes. Default is 1 yes. The input must be divided into positive and negative input voltage to be equal to the rated voltage of the motor(within 6.5V-55V). Specification: Input Voltage: DC 6 .5V-55 V ( the specific voltage should be equal to the rated voltage of the motor) Output Voltage: Linear Under Load Instantaneous Current: 30A Continuous Current: within 20A Type of Speed Regulation: Flow Regulation Speed Adjustment Method: Press +/- Wireless Remote Control: Support Timing: Yes Slow Start and Slow Stop: Can Be Set Speed Digital Display: 0-100 Percentage Table Speed Adjustment Range: 0-100% Control Frequency: 15KHZ Battery: 1 x Button Battery(Included) Wiring Type: Fence Type Terminal Block Support Motor: Brush Motor Module Size: 11.6cm x 7.6cm x 3cm/4.57" x 2.99" x 1.18" (Approx.) Package List: 1x DC Motor Speed Controller 1x Remote Notes: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.

Returns Accepted for this item if it's within 30 Days